If you want high sound quality, wired phones are your best bet. Due to the great noise-canceling and high-frequency range, you can enjoy music to the max.
But unlike Bluetooth headphones, they are prone to damage in all the wires, which may cause a drop in sound quality or cause other device issues like beeping sound and other problems. Meanwhile, wireless phones could struggle to connect to other devices.
Contents
Reasons for the beeping sound in wire headphones
First, if your wired headphones making noise disturbs you, we need to go through the reasons for beeping in wire headphones. The main and most common reason is damage to wires. It can happen on any electronic devices. Wires need to be carefully inspected for any tears or unnatural bends.
Also, they need to be repaired or replaced if the damage is serious.
However, there are other breakages that can cause beeping. Follow the guide to find out about them.
Headphone jack issues
The first very common problem with headphones beeping is audio jacks damage. In headphones that are used on a daily basis, a wire can be damaged by continuous use, which can cause not only beeping but also a drop in sound quality.
Such problems might be hard to notice at first, but usually they become more prominent over time. There are a few steps to check if there are audio jack issues. Check if you hear beeping and humming sounds at different positions of the wire. If the position of the wire affects the beeping sound, then there is a huge possibility that it means that the audio jack is damaged.
You could use your headphones in this position, but if it is uncomfortable, you could always replace part of the wire and audio jack. You should also check if the plastic bands on the audio jack are clean and intact. If they are covered in dust or damaged/bent, it might be a cause for beeping sounds.
If one of the bands is damaged, you might experience a loss of sound in one ear. Clean or replace the audio jack if that is the case.
Headphone dynamic damage
There are a lot of things that can break in headphones, and they can cause headphones beeping. When the dynamics of the headphones are damaged, headphone’s sound quality starts to deteriorate. If there is physical damage that is present on the headset, it might be the real source of buzzing headphones. You could be hearing a beeping sound in only one headphone or in both.
It is hard to determine the real problem if you don’t have sufficient skills.
If you have special instruments, you can fix minor damage, but heavy-duty repair is better left to professionals. Be very careful with any power units of headphones and make sure to pull the plug out of the outlet before disassembling them.
Other device issues
There is a chance that the problem is not the headset. Audio jacks are present in both headphones and another device.
If your headphones are regular headphones, they might beep due to lower resistance. Headphones that connect to a laptop or PC should have bigger resistance than those that are made to be mainly used with a phone. The port of the device receiving audio could also be dirty or damaged and could cause a beeping sound. Try gently cleaning it with a cotton swab or toothpick. You could also use air compression to clean audio jacks on both devices.
If the audio port encounters water, it can be damaged and needs replacement. Try to thoroughly dry it; use a hairdryer or a bowl filled with rice if necessary. Make sure to use a cold stream of air on your hairdryer. Be careful when replacing electronic parts and seek professional help if needed.
Headphones beeping can be caused by other equipment, like cordless telephones or cellular devices.
We will go through the reasons for headphones beeping so you can enjoy music in your so not buzzing headphones.
Reasons for beeping sound in Bluetooth headphones
Electronic devices that use Bluetooth have pretty similar technical errors. Let’s first explore the most common problem with wireless headphones that can cause beeping and humming sound.
Firmware updates
When it comes to firmware updates, the beeping process can be broken down further. During a firmware update, headphones may emit a series of beeps to indicate that the update is currently in progress. These beeps provide assurance that the update is actively taking place.
If a firmware update encounters an issue or fails to install correctly, headphones may produce a unique set of beeps to indicate a problem, using the speakerphone toggle. These beeps prompt users to retry the update or seek assistance.
Lost connection
There are a few steps to check if your Bluetooth headphones are connected properly. Make sure that Bluetooth settings are factory set. Advanced settings are difficult to tune properly, so try turning them off and check if beeping sounds are present.
Next, check if your devices are connected by going to settings of Bluetooth on your device.
If they are okay, then let’s move on to the next problem.
You might hear a beeping sound from wireless headphones because the volume is simply too loud. Try turning it down until the beep is gone. This, of course, varies on different devices, and if the beeping sound is still there, the real problem is not here. If you still hear a beeping sound, the Wi-Fi module on your phone or your laptop should be replaced. You could try to fix it if you have the skills. You might try cleaning it with alcohol or carefully use air compression.
Also, make sure that your headphones are charged.
Error messages
Headphones can produce a series of beeps to communicate specific error messages. That’s called a speakerphone toggle. A continuous or repeated series of beeps may indicate hardware malfunctions like a loose wire, a damaged speaker, or battery issues. These signals help users identify the source of the technical glitch.
Beeping can also occur due to conflicts in headphone drivers or software. It serves as a signal that the headphones are experiencing issues that may require troubleshooting or software updates. In some cases, headphones may beep to warn users of overheating. A technical glitch can also cause overheating. Make sure the headphones are charged to eliminate this reason, too.
Wi-Fi signals
Headphones not only use Bluetooth to connect but also Wi-Fi signals for extra features, like receiving an incoming call from web services and apps.
The problem is likely not the headset. Check if other devices are connected to Wi-Fi. This could be the cause of noise during an incoming call or during the general use of apps that require Wi-Fi to work. Also, try checking the advanced settings on your device; they could filter or block the Wi-Fi signal on your headphones.
If everything is fine with the connection, the problem is probably not the headset. Check your router, try pulling it out, wait for 40 seconds, and then plug it back in. Get in touch with your provider to replace your router if needed, or pay a phone bill if needed. If nothing works, the Wi-Fi module of the headphones needs to be replaced.
Also, cellular devices and cordless telephones can interfere with the signal.
Battery concerns
Another common reason for headphones beeping is the battery of your headsets. They might work fine, but the battery could be running low, and your wireless headphones could be making a humming sound/beeping sound to remind you to charge them. Also, sound quality starts to deteriorate if the headset doesn’t receive enough power.
Besides, make sure that your headphones are charged, if that’s possible, and that they are responding to the charging.
It is also important to mention other battery concerns. It could be damaged and never recharge again or, otherwise, lose most of its capacity. In that case, it most likely needs replacement. Try to plug in a charging cable, connect it to a strong power unit, and leave it for 12-24 hours. If you still hear the beeping sound, then the battery needs to be replaced.
FAQ
How do I stop my headphones from beeping?
You should determine the real problem that causes the beeping sound and then change the advanced settings or replace damaged parts, like wires. You could also turn the volume down.
Why do my wired headphones beep when I plug them in?
This could be a feature of the given headphones, but most likely it means that the headphone jack is damaged. Try twisting all the wires in different directions to find a position that works, or you could replace the jack.
Why do my headphones keep making a beeping noise?
There are a lot of problems that can make your headphones beep, but the two most common ones are:
1. Audio port damage for wire headphones.
2. Technical errors in connection.
3. Other device issues.
Why are my wired headphones beeping with my iPhone?
Most likely, it is due to audio jack issues, but to make sure what the real source of beeping sounds is, both your headphones and your iPhone should be inspected for issues. Plug other headphones in your iPhone and make sure they are working, and also use your headphones on another phone.
Results
The beeping sound is a pretty complex issue that can be caused by different technical glitches, which can make it hard to enjoy music. To find the real source and fix headphones damage, you will need to carefully inspect your devices. Figuring out why headphones are beeping could be more complicated than you would expect. It can be something safe, like a speakerphone toggle, or it could signal about critical errors.
The beeping could happen because the headphones are low on battery, or they are having trouble connecting wirelessly. There is also a huge possibility that buzzing headphones could be caused by damage to the wires. We hope that you have found the solution to headphones beeping and can now enjoy music in so not buzzing headphones.
