How to fix Tribit speaker not charging? If your device power runs out and whatever you do, it won’t charge, there are various potential causes for this issue, either some Bluetooth speaker software glitch or a hardware charging problem.
Here are some troubleshooting techniques you can employ to diagnose and potentially address the matter with a Tribit speaker.
Contents
- 1 Examine the charging cable and port
- 2 Assess a power source/wall outlet
- 3 Consider adapter replacement
- 4 Inspect for fully discharged or faulty battery
- 5 Malfunctioning circuit board
- 6 Reboot the speaker
- 7 Perform a factory reset
- 8 Get in touch with customer support
- 9 Technical specifications
- 10 FAQ
- 11 Results
Examine the charging cable and port
It’s possible that the charging cable is malfunctioning. Try to use a different charging cable to rule out the possibility of a defective charger.
You can connect to any micro USB charging port, and you have to test if it charges the speaker, e.g. an Android phone charger.
Occasionally, dust or grime can get in the speaker’s charging port, so that it can’t connect with the device properly. Gently cleanse the port using a soft brush and connect the charger again.
Assess a power source/wall outlet
Ensure the power source you are utilizing, like a USB charger or power bank, is functioning correctly; try swapping it for another one.
If you’re utilizing a wall charger, experiment with an alternative outlet to confirm that the issue of the Tribit speaker not charging isn’t with the power source.
Consider adapter replacement
To determine it’s a faulty adapter that’s the root cause of the charging issue, try using a superfast Android charger.
You can test an adapter with a 5 W or 10 W charger or some other power source, e.g. a power bank.
Inspect for fully discharged or faulty battery
In case the speaker battery is entirely depleted, it might take a while before any charging indications appear. Charge the speaker for a minimum of 8 hours and assess if there’s any progress.
If the speaker won’t charge, probably the issue is the speaker battery, and you can only change it for a new battery. A faulty battery, as a rule, can be caused by constant exposure to the sun, so that’s overheated or by repeated overcharging.
Malfunctioning circuit board
If the speaker gets wet, it can damage the internal circuit. If water exposure is the cause of the problem, it’s advisable to have the speaker repaired at an authorized service center.
Reboot the speaker
Sometimes, a basic hard reset can help fix the Tribit speaker not charging problem, waking it up from Sleep mode.
Disconnect the Bluetooth speaker from a charger, wait a few seconds, and then press the power button to turn on the speaker again.
Perform a factory reset
In some cases, a factory reset might be necessary to address charging glitches.
Refer to the user manual for your specific Tribit Bluetooth speaker model to learn how to execute a factory reset (usually, you need to hold the combination of buttons: Volume Up + Volume Down). It will help to clear all data from the speaker and revert it to its default settings.
Get in touch with customer support
If your speaker still stops charging, reaching out to Tribit’s customer support is recommended. They could offer tailored troubleshooting steps.
Technical specifications
As a rule, a single charge must allow you to play music with your Tribit speaker for up to twenty-four hours (duration depends on volume level and a music files type) without caring about charging again, thanks to the battery capacity of 4400mAh. And it takes only 4 hours for the battery to charge completely.
You can connect with Bluetooth version 4.2 within a distance of up to 66 feet. A built-in microphone allows you to make calls without needing to hold the device in your hand. With a waterproof design, you don’t need to worry about sudden rain, which makes the speaker ideal for outdoor activities.
The device has 2 40mm drivers and 1 passive radiator. Output power is 2 х 6 W.
These characteristics allow you to always provide high-quality music from the speaker. Turn it on and enjoy!
FAQ
Why is my Tribit storm not charging?
The Tribit Storm may not be charging due to issues with the charging cable, power source, defective battery, or the charging port itself.
Try using our advice from above, and if the problem persists, consider contacting customer support for further assistance to fix Tribit.
Why is my Bluetooth speaker not charging?
Bluetooth speakers might not be charging due to problems with the charging cable, power source, or the speaker’s charging port itself.
Try using different cables and power sources, cleaning the charging port, or troubleshooting the battery, and if issues persist, reach out to customer support for help.
What are the charging lights on the Tribit?
A solid red light indicates that the speaker is currently being charged. This light should change to blue once the battery is fully charged.
If the power button flashes or blinks, it may suggest that the battery is critically low and needs charging. This light could also indicate a charging issue.
Results
Encountering charging difficulties with your Tribit speaker can be a frustrating experience, but by examining the power source, charging cable and port, charger or adapter problems, and considering battery depletion and factory settings resets, users can restore their speaker’s charging functionality.
Hope you found the solution to your Tribit speaker not charging problem. Don’t hesitate to contact customer support to fix Tribit speaker. If you want to solve all doubts read other article about Fix Tribute XSound.
