In this article, we are going to learn the specifics of the JBL Charge 4 buttons’ functions. We are going to explore the purposes of power, volume, Bluetooth buttons, etc., and discover tips and tricks for optimal usage.
Whether you’re a first-time user or an experienced owner of the JBL Charge 4 with a built-in power bank, this guide can provide valuable insights.
Contents
The power button serves as the main regulation for turning the device on and off, and the factory reset. The power button plays a vital role in managing the power status of the device.
By understanding it, you can conserve battery life, which allows hours of work through the USB port (USB-C port or USB-A port): the port access panel is in the bottom part.
The speaker’s on/off switch
To switch on the JBL Charge 4, locate the power button. Usually, the power button is on the top or side of the device. Hold down the power button for a short time until you see or hear indicators such as LED lights or a startup sound.
To switch off the JBL Charge 4, locate the power button one more time. Hold down the power button for several moments. Look for visual or audible cues, such as LED lights turning off or a shutdown sound, indicating that the speaker is powering down.
The power button on the JBL Charge 4 often incorporates indicators and notifications to provide users with important information concerning the speaker’s battery status.
These indicators of the power button may vary depending on the specific model and firmware version but typically include LED lights and audible cues.
LED lights: The JBL Charge 4 typically comes with LED lights that provide visual feedback. For example, a blinking LED may be a sign that the speaker is set to pairing mode, or searching for a connection.
Audible cues: The JBL Charge 4 may also produce various sounds to indicate certain conditions or events. These audible cues can include startup sounds, shutdown sounds, connection tones, and low battery status alerts.
The volume control buttons on the JBL Charge 4 are essential for controlling the speaker’s audio output. They allow you to change the sound levels up or down according to your preference.
The volume buttons are typically located on the top or side of the speaker, adjacent to other control buttons.
mobile-review.com
To raise the sound level, press the volume up button (+). Each press raises the volume incrementally. To lower the sound level, press the volume down button (-). Again, each press decreases the volume incrementally.
Muting or unmuting
In addition to adjusting the sound level, the JBL Charge 4 also provides a convenient mute functionality. To mute the speaker and temporarily disable the audio output, locate the mute button (if available) and press it.
To unmute the speaker and restore audio playback, press the mute button again or customize the sound buttons to the desired level.
Controlling the volume in various modes
The volume buttons on the JBL Charge 4 work consistently across various modes of operation.
Whether you’re using the speaker via Bluetooth connection or with an auxiliary (AUX) cable, these buttons will function the same way.
When connected via Bluetooth, adjusting the volume on the JBL Charge 4 manages the speaker’s output level independently of the connected device.
Similarly, when employing an AUX cable, these buttons on the JBL Charge 4 can directly modify the speaker’s volume without impacting the gadget connected through the AUX input.
Tips for maximizing volume control accuracy
To ensure precise volume control and make your listening journey better with the JBL Charge 4, consider the following tips:
- Employ short, deliberate presses: Instead of holding down these buttons, try using short, distinct presses to adjust the volume incrementally.
- Pay attention to the speaker’s feedback: The JBL Charge 4 often provides audio feedback, such as beeps or tones, to indicate volume changes. Listen for these cues to gauge the volume level accurately to avoid sound distortion.
- Adjust the connected device’s sound: In addition to employing the buttons on the JBL Charge 4, you can also fine-tune the audio output by adjusting the volume on the gadget you have connected to the speaker.
The Bluetooth button on the JBL Charge 4 enables you to switch on the Bluetooth discovery mode.
The Bluetooth button allows you to link the speaker with nearby Bluetooth devices such as smartphones, tablets, laptops, or other speakers.
To activate Bluetooth pairing mode, locate the Bluetooth button on the speaker.
Hold down the Bluetooth button until you see indicators such as LED lights flashing or hear a voice prompt indicating that the speaker is ready to pair.
Linking the speaker with a Bluetooth device
When the JBL Charge 4 is in Bluetooth discovery mode, you may link it with your desired Bluetooth device.
Follow these general steps to link the speaker:
- On your Bluetooth-enabled gadget, enable Bluetooth in the settings or control panel.
- Scan for available Bluetooth devices. The JBL Charge 4 should appear in the list of discoverable gadgets.
- Select the JBL Charge 4 from the list to initiate the linking process.
- If prompted, enter a PIN or confirm a passkey to establish the Bluetooth connection. In the majority of cases, the JBL Charge 4 uses a default PIN (e.g., 0000 or 1234).
- Once the pairing is successful, you may receive a confirmation on both the JBL Charge 4 and the connected gadget.
Managing connected gadgets
The JBL portable speaker allows you to connect multiple Bluetooth devices and manage them conveniently. To manage each Bluetooth device:
- Ensure that Bluetooth is enabled on the gadget you want to link.
- Press the Bluetooth button on the JBL Charge 4 to switch on the Bluetooth mode.
- The speaker will automatically attempt to connect to the last gadget it was paired with. If successful, audio begins playing via that gadget.
- To switch to a different connected gadget, pause or interrupt the music playback on the current gadget. The JBL Charge 4 will then automatically search for and connect to the next available gadget on its list of paired devices.
- Alternatively, you can manually connect to a specific device by going into the Bluetooth settings on that gadget and selecting the JBL Charge 4 from the list of available gadgets.
The play or pause button on the JBL Charge 4 lets you manage the playback of audio content. Whether you’re streaming music, listening to podcasts, or watching videos, the play/pause button provides convenient playback control.
To play audio, press the play/pause button once. The speaker will begin playing the content from the connected gadget. If the audio is already playing, pressing the play or pause button will interrupt the playback.
To resume playback after pausing, press the play/pause button again. The speaker can continue streaming the audio from where it was paused.
Controlling media playback from connected gadgets
The JBL Charge 4’s play/pause button also synchronizes with the media playback controls of connected devices. When paired with a Bluetooth-enabled gadget, you can use the play/pause button to control the playback remotely.
For example, if you have the sound playing on the gadget and have it connected to the JBL Charge 4, pressing this button on the speaker interrupts or resumes the sound playback on your phone.
Switching between different audio sources
The JBL Charge 4 supports multiple audio sources, such as Bluetooth, AUX input, or other connected devices. The play/pause button can be used to switch between these audio sources seamlessly.
If you have multiple devices linked to the speaker, stop the sound playback on the current gadget. The JBL Charge 4 can automatically search for and link to the next available gadget on its list of paired devices.
This enables you to switch between different audio sources by simply pausing the playback on one device and allowing the speaker to connect to another.
The JBL Charge 4 is equipped with skip/forward and previous/backward buttons that allow you to navigate through tracks or chapters when playing audio or video content. These buttons provide convenient control over your media playback and allow you to quickly jump to specific sections.
To skip or go forward to the next track or chapter, press the skip/forward button once. It can move the playback to the next item in the playlist or the next chapter in a video or audiobook.
To go to the previous track or chapter, press the previous/backward button once. It can move the playback back to the previous item in the playlist or the previous chapter.
Fast-forwarding or rewinding media content
In addition to navigating between tracks or chapters, the skip/forward and previous/backward buttons on the JBL portable Bluetooth speaker can be used to fast-forward or rewind within the current track or chapter. This feature allows you to quickly seek specific points in the media content.
To fast-forward, press and hold the skip/forward button. The media playback will begin advancing at an increased speed. Release the button when you reach the desired point.
To rewind, press and hold the previous/backward button. The media playback will begin moving backward at an increased speed. Release the button when you reach the desired point.
Skipping to the next or previous song or chapter
The skip/forward and previous/backward buttons on the JBL Charge 4 also enable you to go to the following or preceding song or chapter directly, without the need for fast-forwarding or rewinding.
To go to the following song or chapter, press the skip/forward button twice in quick succession.
This will immediately move the playback to the next item in the playlist or the next chapter.
To go to the preceding song or chapter, press the previous/backward button twice in quick succession. This will immediately move the playback back to the previous item in the playlist or the previous chapter.
Conclusion
In conclusion, understanding the button functions of the JBL speakers with a built-in power bank is crucial for optimal usage and an enhanced audio experience.
FAQ
The JBL Charge 4 typically features several buttons on its control panel. These include the power button, volume up and down buttons, Bluetooth button, play/pause button, skip/forward, and previous/backward buttons.
How do I turn up the bass on my JBL Charge 4?
The JBL Charge 4 does not have a dedicated bass adjustment button. However, you can enhance the bass response by adjusting the equalizer settings on your connected device, or via the JBL portable app. Most devices provide built-in equalizer options that allow you to increase or decrease bass levels.
The triangular play button serves a triple function, as it can pause the playback with a single press and skip to the next track when double-pressed.
The hourglass or infinity symbol found on the JBL portable Bluetooth speaker represents the JBL Connect+ button to enter “party mode” and play the same audio at the same time. JBL Connect+ functionality allows you to link and synchronize all the speakers, up to 100 compatible ones, to play the same audio with other speakers.
What are the low-frequency mode and service mode on JBL Charge 4?
The Low-frequency mode decreases the high-frequency sounds. Low-frequency mode amplifies the low-frequency sounds on the speaker. To activate (or exit low-frequency mode), simultaneously press the volume down and Bluetooth buttons until the oval ring illuminates in a steady white color, meaning you’re in low-frequency mode.
The service mode on JBL speakers is an important feature. Service mode allows you to lock the speaker. Service mode prevents any unwanted interference or interruptions to the audio playback. To turn on/exit service mode, press the play and Bluetooth buttons. Service mode makes the buttons unresponsive.
