Surround sound with surround speakers involves placing multiple speakers around a room to create a 3D audio effect.
The most common setup is the 5.1 system, which consists of a center speaker, front left and right speakers, rear left and right speakers, and a subwoofer.
The center speaker is mainly responsible for dialogues, while the front left and right speakers are responsible for music and sounds coming from the front of the screen.
The rear speakers left and right create the sense of surround sound, making the viewer feel like they are in the middle of the action.
The subwoofer produces low-frequency sounds like explosions and deep bass music.
More advanced systems like 7.1 and Dolby Atmos include additional speakers for a more immersive audio experience. Such a sound system may include ceiling speakers.
In this article, you will know how to make all speakers work on surround sound.
Contents
How to make all speakers work on surround sound
Now let’s go into the details of how to make all speakers work on surround sound.
- Check connections of surround speakers: Ensure that all the surround sound speakers are connected correctly to the corresponding ports located at the rear of the receiver or amplifier. Each channel should have its speaker connection.
- Set the speaker size and distance: Most surround sound receivers have an auto-setup feature that will configure the speaker size and distance.
- Set the sound mode: Make sure your receiver or amplifier is set to the “Surround Sound” mode.
- Calibration of surround sound speakers: Most modern receivers have an auto-calibration feature to ensure that all the speakers in the set are equally adjusted.
- Balance the surround speakers: After calibration, play some audio and adjust the balance of each speaker to adjust the sound levels until it is most accurate for each speaker.
- Check audio settings: Make sure you are playing audio from a source that supports surround sound and that you have selected the correct audio input on your receiver or amplifier.
- Test the surround sound speakers: Play a surround sound test tone to each speaker to ensure that they are working. Adjust the volume of each speaker to ensure that you get a balanced sound across all the channels.
There is no surround sound being produced by the speakers
If your speakers aren’t producing any sound, here are some tips for how to make all speakers work on surround sound:
Check the volume level in the surround sound systems: Sometimes the volume may be turned down or muted, so make sure to check this.
Check the connections in the surround system: Ensure that the cables connecting the speakers to the audio device are all properly connected and not loose.
Try a different audio source with a surround system: If the issue persists, try a different audio source with different sound quality to make sure the problem isn’t with the device you are trying to play audio from.
Update or reinstall drivers with the surround system: If the issue is with your computer speakers, try updating or reinstalling the audio drivers.
Check the power source in the surround system.
Try a different set of speakers: If none of the above suggestions work, it may be an issue with the speakers themselves. Test a different set of speakers to diagnose the issue.
The Surround speakers work not very well
Problems with the speakers’ work on surround sound speakers may be triggered by a number of issues.
Check the speaker connections work on surround sound: Make sure that all the speakers are properly connected to the amplifier or receiver settings.
Check the volume level: Make sure that the volume is turned up on both the amplifier or receiver and the speakers themselves.
Test the speaker’s individual sound quality.
Check for software or receiver settings.
Check for hardware damage: If all else fails, the speakers may be damaged. Look for any physical damage or signs of wear, such as cracks, tears, or frayed wires.
The quality of sound from the height speakers is poor
There could be several reasons why your height speakers sound poorly. Here are a few possible causes and solutions.
Misplacement of speakers: Height’s speakers are designed to be mounted on the ceiling or high up on the walls. If they are not properly placed, they may not secure stereo sound to their best.
Make sure that the positioning of your height speakers is correct according to the manufacturer’s recommendations.
Hardware limitations: Your audio receiver or amplifier may not have the capability to provide enough power to your height speakers. Check if your system supports the speakers’ power requirements and adjust the settings accordingly.
Poor wiring: Verify that your height speakers are wired correctly and that the connections are secure. Loose or defective wiring can cause distortions and other sound problems.
Sound settings: Check that the receiver’s settings in your audio device are correct. Make sure that your receiver’s settings or amplifier are optimized to work with the speakers and the type of content you are listening to. You can also make codec settings.
Speaker quality: Finally, it could be that the speakers’ height is not of good quality. Evaluate the speakers for any visible signs of wear and tear, and consider upgrading to better quality speakers to improve the sound.
There is an issue with the front speakers
Below are some common issues that might affect front speakers.
- No sound from the front speakers: Check if the speakers are connected properly to the audio source. Also, make sure the volume is turned up, and the audio source is not muted.
- Distorted sound from the front speakers: This may be due to a damaged or blown speaker. You can test this by swapping the front speakers with the rear speakers.
- Low volume from the front speakers: This may be due to the balance settings being off or the speakers being incorrectly wired.
The sound coming from the system is distorted
There are several reasons why the sound coming from your surround sound system might be distorted.
- Check your surround sound system: Ensure your speakers are functioning properly by checking the volume levels, inspecting the cables, and checking the power source. If necessary, reconnect your speakers to your device.
- Adjust your audio settings: Adjust the bass, treble, and other sound settings on your device to ensure they are not causing distortion.
- Check the audio source of all your speakers: If you are playing audio from a source such as a CD or MP3, ensure that it is not scratched or distorted.
- Use a different cable or connection: If the distortion persists, try using a different audio cable or connection, as this may solve the issue.
Check out all the connections
Make sure the RCA power cables connecting the receiver and subwoofer are properly inserted.
Careful consideration should be given to where the subwoofer should be placed.
Position the subwoofer where you typically listen to music or watch movies. Then, travel around the room to assess the quality of the bass.
This will help determine the correct placement of the subwoofer.
This article offers additional details and guidelines on how to crossover settings of your surround sound system.
FAQ
Why don’t all my speakers work on my surround sound?
There are several potential reasons why all of the speakers on your surround sound system may not be working.
Configuration issue
Check to make sure that the speakers are set up correctly in your receiver’s configuration settings.
Wiring issues
There may be a wiring problem that is preventing some of the speakers from working.
Speaker damage
A speaker may not be working properly if it has become damaged or blown out. Try swapping out the speaker with a working one to determine if this is the issue.
Receiver issue
If all else fails, there may be a problem with the receiver itself that is preventing some of the speakers from functioning.
How do I get full surround sound?
To get full surround sound, you need to:
Purchase a surround sound system or soundbar that supports at least 5.1 channels (5 speakers and 1 subwoofer).
Place the speakers strategically around the room, ensuring that the front left, center and right speakers are placed at ear level and the rear left and right speakers are placed behind the listening area.
Connect the speakers and subwoofer to your AV receiver or soundbar using the appropriate cables.
Configure the audio settings on your receiver or soundbar to enable surround sound and adjust the levels of each speaker to ensure an even distribution of sound.
Play a movie or music in a multi-channel format, such as Dolby Digital or DTS, to fully experience the surround sound effect.
Why is only one of my speakers working?
There could be several reasons why only one of your speakers is working:
Faulty speaker wires: Check the speaker wires to make sure they are properly connected to the speakers and receiver.
Speaker settings: Check the speaker settings on your device (e.g. TV, receiver, computer) to ensure that both speakers are selected and enabled.
Balance settings: Check the balance settings on your device to ensure that the sound is not inadvertently skewed to one side.
Faulty speaker: If none of the above solutions work, the speaker itself may be faulty and require repair or replacement.
Wiring issues: If the speakers are active and use their power, there could be wiring issues with the one that is not working, such as the amplifier being broken.
How do I play music through all speakers?
To play music through all speakers, follow the steps below.
Check if your music player app supports multi-room audio. Many popular apps such as Spotify, Apple Music, Pandora, and Amazon Music have built-in multi-room support.
If your app supports multi-room audio, connect all of your speakers to the same Wi-Fi network.
Open your music player app and select the song or playlist you want to play.
Look for an icon or option that says “Devices” or “Speakers” and select it.
Choose all of the speakers you want to play the music through.
Press play, and the music should start playing through all selected speakers simultaneously.
Conclusions
Of course, having issues with speakers can be an unpleasant surprise for you. This can be caused by disconnected wires or defects in the speakers.
Your task is to determine the cause of the failure in the stereo system overall.
In the article, you learned how to make all speakers work on surround sound.
The most important thing in setting up speakers for work is a good connection.
Surround speakers in a home theater speaker system should be connected with a speaker wire.
A surround sound setup should begin with audio channels. It is necessary to check audio signals.
There must be good audio signals at every listening position. For this, check the connection again through the speaker wire.
I also want to add that it is important to check the TV cable line ground.
