Connecting Sonos to Samsung TV: syncing sound

How to connecting Sonos to Samsung TV? This post will walk you through the process of connecting your Samsung TV or Apple TV to a Sonos Amp, Sonos Beam, Sonos Arc, or other Sonos Home Theatre devices.

Preparing your equipment

You must secure all the necessary tools on hand before we connect Sonos to Samsung TV.

Sonos speakers

You might have one or more external speakers (such as Sonos Amp, Sonos Beam, Sonos Arc, etc.) to stream audio depending on your preferences.

Ascertain that they are charged and prepared to use.

Samsung TV

Your entertainment system’s focal point is your dependable Samsung TV.

Make that it is operational, powered on, and prepared for use.

Required cables and adapters

The cables and adapters you require will depend on the type of connection your Samsung TV will have with your Sonos Beam or other model.

Bluetooth connectivity, HDMI, and optical audio cables are typical alternatives. For recommended connections, consult the manual for Samsung TVs.

Wi-Fi network

For flawless communication between your Sonos speakers and other devices, a robust Wi-Fi network is necessary.

Make certain that your network is operating properly and that you have access to the required credentials.

Mobile device or computer

For Sonos setup and control, you’ll probably need a phone, tablet, or computer.

Ensure that your device is charged and joined to the same Wi-Fi network as your Samsung TV and Sonos Beam, if applicable.

After assembling all the required tools, take time to make sure everything is in working order.

You can avoid later time and frustration by taking this first step.

Make sure your Samsung TV has a clean picture, your Sonos speakers are powered on, and all cables and adapters are in good condition.

Setting up Sonos

We’ve checked to make sure everything is in working condition, and now it’s time to set up your Sonos speakers for a premium audio experience.

Install the Sonos app first on your tablet or smartphone. It is available in the app store for your device (such as the Apple App Store or Google Play Store).

Once the download is complete, install the app and launch it.

You must make an account if you are new to Sonos. To register, adhere to the on-screen instructions. Simply log in if you already have a Sonos account.

You will be prompted by the Sonos app to link your Sonos system to your Wi-Fi network. To finish this phase, adhere to the directions in the app.

This is necessary for your devices to communicate with one another.

Your Sonos speakers should then be connected to the system. Usually, you can accomplish this via the Sonos app:

1. Activate the Sonos app.
2. Go to the “System” or “Settings”.
3. Simply select “Add a Player or Sub.”
4. Locate and add your Sonos speakers by following the on-screen directions. Ascertain that they are turned on and logged onto the same WiFi network.

Update your Sonos setup. Checking for firmware upgrades for your Sonos speakers is a healthy habit. Both performance and new features may be added by these updates.

Follow the instructions after selecting “Settings” > “System Updates” in the Sonos app.

After setting up your Sonos speakers, it’s important to place them carefully for the optimum sound. Take into account these suggestions:

• Center channel: position your Sonos soundbar in the center, ideally below or above your Samsung TV if you have one. By doing this, it is made sure that the dialogue and sound effects perfectly match the action on screen.
• Surround speakers: place your surround speakers to the left and right of where you will be watching if you have more Sonos speakers. For a more immersive experience, place these slightly behind your primary seated position.
• Subwoofer: if you have a Sonos Sub, set it up in the space to disperse deep bass sounds equally. For subwoofers, a wall or a corner is frequently a good location.
• Adjust for room acoustics: for best results, experiment with the speaker location and placement in relation to the acoustics of your room. For best performance, you might need to reposition speakers or change their Sonos app settings.

Connect Sonos to Samsung TV

Let’s connect Sonos to Samsung TVs or Apple TV now.

There are different options available to you, depending on the model of your Samsung TV and Sonos speaker.

Each approach will be described in detail, along with its benefits and drawbacks, and troubleshooting advice for typical problems.

HDMI cable

Linking procedures:

1. Connect your Samsung TV’s HDMI ARC port and your Sonos soundbar HDMI ARC input with an HDMI cable.
2. Secure that the audio settings on your TV are set to HDMI cable output.

Troubleshooting:

• Verify that the HDMI ARC cable is securely attached.
• Update the firmware on your TV and Sonos system.
• For your TV to act as a remote control, make sure HDMI CEC (Consumer Electronics Control) is enabled.

Optical audio cable (Toslink)

Linking procedures:

1. From the optical audio output on your TV to the optical input on your Sonos speaker, connect an optical audio cable (Toslink).
2. Set the optical audio connection as the audio output method on your TV.

Troubleshooting:

• Secure that the optical cable is attached firmly.
• Check the optical ports for any obstructions.
• Check to see if the TV audio output is set to “Optical” or “External Speaker.”

Bluetooth (for wireless speakers)

Linking procedures:

1. The Sonos speaker Bluetooth should be enabled.
2. Utilizing the Bluetooth settings on both devices, connect your Samsung TV to the Sonos speaker.

Troubleshooting:

• Verify that your Sonos speaker has Bluetooth functionality.
• Secure that the Bluetooth on your Samsung TV is active and in pairing mode.
• Reduce signal interference caused by moving objects that might be doing so.

Adjusting audio settings

You should adjust the audio settings to get the greatest sound quality possible now that your Sonos speaker is linked to your Samsung TV.

Accessing audio settings on your Samsung TV wirelessly:

1. To enter the TV’s menu, hit the “Menu” button on your Samsung TV remote.
2. Using the arrow keys or directional pad on your remote, find the “Sound” or “Audio” section.
3. The “Sound” menu has a number of audio options. Depending on the model of your Samsung TV, these settings may be different, but they usually include things like “Sound Mode,” “Equalizer,” “Sound Output,” and “Speaker Settings.”

Choosing a Sonos speaker as the source for your sound output:

1. In the sound menu, look for and choose the “Sound Output” or “Speaker Settings” option.
2. Select “Bluetooth Speaker List” or a comparable option that gives you the ability to choose the audio output device.
3. Bluetooth Speaker List of available audio output devices should appear. Choose your Sonos speaker or soundbar as the main audio output source by looking for them in the list.

Conclusion

Hopefully, this post will facilitate in joining your Sonos speaker and your Samsung TV or Apple TV and improve your TV viewing experience.

FAQ